Porter-Cable 90550099, PC1800DS instruction manual Symbols, Functional Description

90550099 PC1800DS Crdl Sander REVISED 4/1/09 1:52 PM Page 5

Symbols

•The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V			volts	A		amperes
Hz			hertz	W		watts
min			minutes	no		alternating current
			direct current			no load speed
		............
			Class I Construction			earthing terminal
	................				..................
			(grounded)		................	safety alert symbol
	................		Class II Construction	.../min or rpm...		revolutions or
			(double insulated)			reciprocation per minute
sfpm			surface feet per minute

SAVE THESE INSTRUCTIONS

This product can accept any of the batteries and chargers listed in the chart below.

LI-ION Battery Packs and Chargers NI-CD Battery Packs and Chargers

Description	Cat. #
Battery: LI-ION 18V	PC18BL
	PC18BLX
	PC18BLEX
Charger: LI-ION	PCLMVC
	PCXMVC

FUNCTIONAL DESCRIPTION

1.On/Off Switch

2.Sanding Base

3.Vacuum Port

4.Battery Compartment

5.Finger Attachment

6.Vacuum Port Adaptor

Description	Cat. #
Battery: NI-CD 18V	PC18B
Charger: NI-CD	PCMVC
	PCXMVC
A
	1
	5
4	2
	3
	6

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.

•Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.

: Shock hazard. Do not allow any liquid to get inside charger.

: Burn hazard. To reduce the risk of injury, charge only designated PORTER-CABLEbatteries. Other types of batteries may burst causing personal injury and damage.

: Under certain conditions, with the charger plugged in to the power

5