90550099 PC1800DS Crdl Sander REVISED 4/1/09 1:52 PM Page 12

TROUBLESHOOTING

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Battery pack not installed properly.

• Check battery pack

 

 

installation.

 

• Battery pack not charged.

• Check battery pack

 

 

charging requirements.

Battery pack will not charge. • Battery pack not inserted into charger.

Charger not plugged in.

Insert battery pack into charger until LED appears.

Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.

 

• Surrounding air temperature

• Move charger and battery

 

too hot or too cold.

pack to a surrounding air

 

 

temperature of above 40

 

 

degrees F (4,5°C) or below

 

 

105 degrees F (+40,5°C).

 

 

SPECIALNOTES FOR USE WITH LITHIUM BATTERIES

 

• Unit shuts off abruptly.

• Battery pack has reached its

•Allow battery pack to cool

 

maximum thermal limit.

down.

 

• Out of charge. ( To

• Place on charger and

 

maximize the life of the

allow to charge.

 

batterypackitisdesigned

 

 

to shutoff abruptly when

 

 

the charge is depleted.)

 

For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.

THE RBRC™ SEAL

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the LI-ION or NI-CD battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by

PORTER-CABLE.

RBRC™ in cooperation with PORTER-CABLE and other battery users, has established programs in the United States to facilitate the collection of spent LI-ION or NI-CD batteries. Help protect our environment and conserve natural resources by returning the spent LI-ION or NI-CD battery to an authorized PORTER-CABLE service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery.

RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our service website at www.portercable.com. You can also order parts from your nearest PORTER-CABLE Factory Service Center or PORTER-CABLE Authorized Warranty Service Center. Or, you can call our Customer Care Center at (888) 848-5175.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information about PORTER-CABLE, its factory service centers or authorized warranty service centers, visit our website at www.portercable.com or call our Customer Care Center at (888) 848-5175. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others.

You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305, (888) 848-5175 - Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, etc.).

12

Page 12
Image 12
Porter-Cable PC1800DS, 90550099 Troubleshooting, Rbrc Seal, Maintenance, Replacement Parts Service and Repairs