6
SAFETY WARNINGS AND INSTRUCTIONS: DRILLS
1. Hold drill firmly with one hand on the grip and the other hand on the side handle as
shown in figure C.
2. When attaching accessories in the drill chuck, tighten with all three holes to prevent
slippage.
Drill may stall (if overloaded or improperly used) causing a twist. Always
expect the stall. Grip the drill firmly to control the twisting action and prevent loss of
control which could cause personal injury. If a stall does occur, release the trigger
immediately and determine the reason for the stall before re-starting.
:
:
D
FG
H
E
90538205 PC700D & PC650HD 7/2/08 12:29 PM Page 6