PP2000 (E) User’s Manual 4 - 1
IV. MAINTENANCE NOTICES
l The printer should be put at a well ventilated site and avoid direct
sunshine, also avoid high temperature, high humidity, high
magnetic field. The site should also be free from lots of metal chips
and dust.
l Never place any vessel for water alcohol beverages or any kind of
fluid over the printer. Otherwise it may get turned over and damage
the component inside.
l Use only alcohol or neutral detergent for cleaning of the exterior,
please never use organic solvent like benzene or thinner.
l Maintenance guide:
Ribbon :
Replace for a new one every three months or twenty thousand
pieces of receipt/journal printing. Please do not pour ink into
the ribbon or it is easy to damage the print head.
Print head:
Replace for a new one every seventy thousand pieces of
receipt/journal printing.
Store stamp:
Add ink into store stamp once every three months or twenty
thousand pieces of receipt/journal printed. To avoid illegible
stamping, please replace new store stamp once every twelve
months or eighty thousand pieces of receipt/journal printing.
Auto cutter:
Clean any paper cutting residue and dust in the auto cutting
mechanism regularly to avoid sensor malfunction and paper
jam.
² Use of any ribbon other than the standard supply from the
manufacturer (ERC-32) or refilling of any ink to the ribbon
may cause damage like broken pin in the print head and/or
other consequences. Such damage and consequences are
responsibility of the user and are out of the warranty of the
manufacturer.