Auto Cutter Adjustment Window
To check for home position of the auto cutter, please open the auto cutter and look into the blade slot and the spindle hole as in pictures below. Use proper tool to cut away the paper around auto cutter if it presents obstacle to the actions. Clear away any paper scraps from the auto cutter once it is reset to position.
Blade Slot |
|
|
|
|
|
|
|
| Î |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| š |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| Retract blade from the slot |
| |||
Î |
| Move | š | ||||||
| spindle | ||||||||
Spindle Hole |
|
|
| down |
| ||||
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
In case it is the auto cutter that fails to respond to the paper cut command, please contact your dealer or a qualified service person. However, please use manual cutter as a temporary alternative measure before this problem is remedied.
3 - 4
