I N S TA L L AT I O N
Figure 1 | Figure 2 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 3
Wall Installation
1Remove the base.
Slide the base sideways as shown by the REMOVE arrow (Figure 1).
2Connect the short line cord to the telephone.
Plug the five inch line cord into the LINE jack in the center of the bottom of the set.
3Reinstall the base.
Turn the base so that the larger end is toward the bottom of the telephone (Figure 2). Insert the base tabs into the slots. Then slide sideways in the direction of the INSTALL arrow to lock the base into the phone (Figure 3).
4Reverse the handset tab.
To mount the telephone on a wall, you must reverse the handset tab. This tab holds the handset when you hang up. Hold down the switchhook, and slide the tab up and out of its slot (Figure 5). Turn the tab so that the end with the “hook” is up (Figure 6). Then insert the tab back into its slot (Figure 7).
Figure 4
5Connect the line cord to the modu- lar jack and mount the phone onto the wall jack.
Plug the free end of the line cord into a modular wall jack. Make sure the cord snaps firmly into place. Place the phone on the wall jack mounting studs and pull down until it is held securely (Figure 4).
6Follow Steps 5–7 under Table/Desk Installation.
Figure 5 | Figure 6 | Figure 7 |
2
