POSIFLEX Business Machines PP7700 Series warranty Physical and driver installation

connection supports a genuine virtual cable connection thus supports the application software to use even the so-called direct I/O method for controlling the printer. The Posiflex wireless connection supports various application environments from having single Dongle to control single wireless printer to having single Dongle to control multiple wireless printers and further to having multiple Dongles to control multiple wireless printers as long as certain discipline in printer-Dongle connection and disconnection procedures are well organized in the application program.

In general practice, the application program provided by system integrators should have included the programming elements for the Posiflex wireless connection driver and the user should follow the arrangement of the application program accordingly. However, if the software did not take care of the wireless connection, the user may install the relevant driver prior to the execution of the application software. The driver can be found together in delivery of the wireless printer or the Posiflex Product Information CD of version 1.9 or above, or please visit our web http://www.posiflex.com or http://www.posiflex.com.tw for it.

Procedures below are applicable to the situation that the wireless connection is not covered by the application program only.

b. Physical and driver installation

1.Select a place free from strong RF interferences and metal objects for set-up of the wireless printer. Do the Dongle installation according to its installation guide. Avoid excessive obstacles such as metal plate, wire mesh or RC wall etc. in between. Refer to section “Signal detection” for help to find the most suitable position setup as the radio frequency signals are concerned.

2 - 3