Open Cutter Cover when hood locked
Lift transparent protective foil
Turn the wheel downward till a hole in the plastic gear appears in this window
5.Graphic Printing Speed
The RS232 protocol for printer Dongle connection defaults to 19200 bps. However, this setting could appear insufficient for graphic printing mode. In such case, please change the RS232 baud rate to 38400 bps for the Dongle on the host system.
6.Wireless Connection Concerns
There are several conditions that could lead to poor wireless connection message/status. Following discussions are attempts to cover advices on what to do.
Printer goes into error status with intact wireless connection: --This may occur for example if the printer top hood is opened during normal operation (maybe for paper roll change or else) and all E-M field conditions remain unchanged. The Error LED on PP7700 will lit. The wireless connection driver in the host system will indicate loss of connection and keep trying for reconnection till time out. If the error status of PP7700 is expelled before the host time out, the wireless connection resumes automatically without trouble. If the host already timed out when PP7700 returns normal, just re-initiate the wireless connection and everything will be OK. However, if the situation occurs due to paper out in middle of a receipt printing, the receipt would be
3 - 5
