POSIFLEX Business Machines PP7700 Series D. SOFTWARE COMMANDS

5 - 5

guide adaptor for use with the paper roll of 58 mm width, the

switch should be set to ON in PP7700.

Switch position 3 is usually set to OFF for ESC/POS

command application that prints at 512 dots / line. Only technical

users shall set this switch to ON and make the printer work in the

576 dots / line format.

D. SOFTWARE COMMANDS

The Aura thermal printer supports all commands applicable

to Epson printer TM-T88II. The only difference is the

smoothening command in enlarged text fonts. Please visit our

web site http://www.posiflex.com.tw, http://www.posiflextw.com

or http://www.posiflexusa.com for detail description of the

supported commands if required.

1. Paper Out Alarm

When Paper End signal is detected, the printer keeps on

intensive beeping and stops receiving data till the signal is

neutralized. When Paper Near End signal is detected, the

2. Enhancement Commands

Following commands are included in the printer firmware:

ESC ‘o’: Beep command

GS ‘o’ m: Beep definition (0 < m 16, default 3 seconds)

ESC ‘p’ m n

1 n

2: Cash drawer kick or kitchen bell drive

command

GS ‘p’ m n: Beep when cash drawer remain open (0 < m <

256, n = ‘0’ or ‘1’)

Explanations as below:

ESC ‘o’: Beep command