ASSEMBLY
INSTALLING WHEEL ASSEMBLY
See Figure 5.
■Locate the following items:
2 wheels
2 square curved washers (14)
2 flat washers (4)
2 hex nuts (11)
2 nuts (6)
■Slide wheel over axle extension.
■ Slide flat washer on axle extension.
■Install hex nut on axle extension and tighten to secure.
■Repeat for second wheel.
NOTE: Block up frame securely with wood blocks to provide clearance for frame bolts & wheel assembly.
■Slide square curved washer, curved side down, on bolt.
■Place on frame and slide bolt through frame hole.
■Repeat for second bolt.
■Lift axle and align hole with installed frame bolts.
■Install nuts on 2 bolts and tighten to secure
INSTALLING FOOT ASSEMBLY
See Figure 6.
■Locate the following items:
2 foot supports (12)
6 bolts (13)
NOTE: Block up frame securely with wood blocks to provide clearance for foot support assembly.
■Align foot support with 3 holes in frame cross member.
■Insert 3 bolts into welded nuts on foot support.
■Tighten bolts to secure
■Repeat for second foot.
Fig. 5
Fig. 6
12
