SERVICE AND ADJUSTMENTS

TO REMOVE WHEELS (See Fig. 21)

Remove the klik pin and remove wheel from axle.

IMPORTANT: When installing wheel, be sure to use the in- nermost hole in axle and the wheel hub hole. To disengage drive system from the wheels (for pushing or transporting the snow thrower), remove klik pin from wheel hub and insert pin into the outermost hole in axle only.

KLIK PIN

OUTER HOLE

 

INNER

 

HOLE

WHEEL

WHEEL HUB

FIG. 21

NOTE: To seal punctures or prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

ENGINE

See engine manual.

CARBURETOR

Your carburetor is not adjustable. Engine performance should not be affected at altitudes up to 7,000 feet (2,134 meters). If your engine does not operate properly due to suspected carburetor problems, take your snow thrower to a qualified service center.

ENGINE SPEED

Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous and will void the warranty. If you think the engine-governed high speed needs adjusting, contact a qualified service center, which has proper equipment and experience to make any necessary adjustments.

TO ADJUST CABLE TENSION (See Fig. 22)

Adjust cable tension by turning the adjuster turn buckle, located on the right hand cable. Grasp the long section tightly and turn the short section to lengthen the adjuster. Adjust until cable is snug.

ADJUSTER TURN

BUCKLE

FIG. 22

17

Page 17
Image 17
Poulan 96198002601, 428701 owner manual To Remove Wheels See Fig, Carburetor, Engine Speed, To Adjust Cable Tension See Fig

96198002601, 428701 specifications

The Poulan 428701,96198002601 is a powerful and efficient chainsaw designed for homeowners and professionals alike. This model combines advanced technology with user-friendly features, making it a top choice for those looking to tackle various chopping and cutting tasks with ease.

One of the key features of this chainsaw is its robust engine, which provides dependable performance. The Poulan 428701 is equipped with a 40cc two-cycle engine that delivers ample power for cutting through large tree limbs, firewood preparation, and even light commercial work. The engine's design focuses on fuel efficiency, ensuring that users can work longer without frequent refueling.

In terms of technology, the chainsaw incorporates a tool-less chain tensioning system that allows users to adjust the chain’s tension quickly and easily. This feature not only saves time but also enhances safety, as a correctly tensioned chain reduces the risk of kickback and improves cutting performance. The easy-access air filter ensures that maintenance is simple, allowing users to keep their chainsaw performing optimally with minimal effort.

The Poulan 428701 also boasts a lightweight design, weighing in at just under 12 pounds. This makes it manageable for extended use without causing fatigue, making it suitable for both beginners and experienced users. The ergonomic handle is designed for comfort, providing a secure grip that enhances control during operation.

Safety is a significant concern with power tools, and this chainsaw is equipped with a chain brake mechanism. The chain brake stops the chain immediately in case of a kickback, protecting the user from potentially serious injuries. Its low vibration technology further reduces operator fatigue and increases comfort for prolonged use.

Another notable characteristic of the Poulan 428701 is its durable construction. Built with high-quality materials, this chainsaw is designed to withstand the rigors of regular use while maintaining its performance. The bar and chain are designed for longevity, with easy compatibility for replacements when necessary.

In summary, the Poulan 428701,96198002601 chainsaw is a reliable and efficient tool that combines power, safety, and ease of use. With features such as a powerful engine, tool-less chain tensioning, low vibration, and a focus on user comfort, it caters to a wide range of cutting needs, making it a worthwhile addition to any toolkit. Whether for home landscaping or professional use, this chainsaw delivers performance that users can trust.