TROUBLESHOOTING

See appropriate section in manual unless directed to an authorized service center/department.

PROBLEM

 

CAUSE

 

CORRECTION

Does not start

1.

Fuel shut-off valve (if so

1.

Turn fuel shut-off valve to OPEN position.

 

 

equipped) in OFF position.

 

 

 

2.

Safety ignition key

2.

Insert safety ignition key.

 

 

is not inserted.

 

 

 

3.

Out of fuel.

3.

Fill fuel tank with fresh, clean gasoline.

 

4.

Throttle in STOP position

4.

Move throttle to FAST position

 

5.

Choke in OFF position.

5.

Move to FULL position.

 

6.

Primer not depressed.

6.

Prime as instructed in the Operation section of this manual.

 

7.

Engine is flooded.

7.

Wait a few minutes before restarting, DO NOT prime.

 

8.

Spark plug wire is

8.

Connect wire to spark plug.

 

 

disconnected.

 

 

 

9.

Bad spark plug.

9.

Replace spark plug.

 

10.

Stale fuel.

10.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

11.

Water in fuel.

11.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

 

 

 

 

Loss of power

1.

Spark plug wire loose.

1.

Reconnect spark plug wire.

 

2.

Throwing too much snow.

2.

Reduce speed and width of swath.

 

3.

Fuel tank cap is covered

3.

Remove ice and snow on and around fuel tank cap.

 

 

with ice or snow.

 

 

 

4.

Dirty or clogged muffler.

4.

Clean or replace muffler.

 

 

 

 

 

Engine idles or

1.

Choke is in FULL position.

1.

Move choke to OFF position.

runs roughly

2.

Blockage in fuel line.

2.

Clean fuel line.

 

3.

Stale fuel.

3.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

4.

Water in fuel.

4.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

5.

Carburetor is in need of

5.

Contact an authorized service center/department.

 

 

adjustment or overhaul.

 

 

 

 

 

 

 

Excessive

1.

Loose parts or damaged

1.

Tighten all fasteners. Replace damaged parts. If vibration

vibration

 

augers or impeller.

 

remains, contact an authorized service center/department.

 

 

 

 

 

Recoil starter

1.

Frozen recoil starter.

1.

See “IF RECOIL STARTER HAS FROZEN”

is hard to pull

 

 

 

in the Operation section of this manual.

 

 

 

 

 

Loss of traction

1.

Drive belt is worn.

1.

Check / replace drive belt.

drive / slowing

2.

Drive belt is off of pulley.

2.

Check / reinstall drive belt.

of drive speed

3.

Friction drive wheel is worn.

3.

Contact an authorized service center/department.

 

 

 

 

 

Loss of snow

1.

Auger belt is off of pulley.

1.

Check / reinstall auger belt.

discharge or

2.

Auger belt is worn.

2.

Check / replace auger belt.

slowing of

3.

Clogged discharge chute.

3.

Clean snow chute.

snow discharge

4.

Augers / impeller jammed.

4.

Remove debris or foreign object from augers / impeller.

 

 

 

 

 

19

Page 19
Image 19
Poulan 96198002601, 428701 owner manual Troubleshooting

96198002601, 428701 specifications

The Poulan 428701,96198002601 is a powerful and efficient chainsaw designed for homeowners and professionals alike. This model combines advanced technology with user-friendly features, making it a top choice for those looking to tackle various chopping and cutting tasks with ease.

One of the key features of this chainsaw is its robust engine, which provides dependable performance. The Poulan 428701 is equipped with a 40cc two-cycle engine that delivers ample power for cutting through large tree limbs, firewood preparation, and even light commercial work. The engine's design focuses on fuel efficiency, ensuring that users can work longer without frequent refueling.

In terms of technology, the chainsaw incorporates a tool-less chain tensioning system that allows users to adjust the chain’s tension quickly and easily. This feature not only saves time but also enhances safety, as a correctly tensioned chain reduces the risk of kickback and improves cutting performance. The easy-access air filter ensures that maintenance is simple, allowing users to keep their chainsaw performing optimally with minimal effort.

The Poulan 428701 also boasts a lightweight design, weighing in at just under 12 pounds. This makes it manageable for extended use without causing fatigue, making it suitable for both beginners and experienced users. The ergonomic handle is designed for comfort, providing a secure grip that enhances control during operation.

Safety is a significant concern with power tools, and this chainsaw is equipped with a chain brake mechanism. The chain brake stops the chain immediately in case of a kickback, protecting the user from potentially serious injuries. Its low vibration technology further reduces operator fatigue and increases comfort for prolonged use.

Another notable characteristic of the Poulan 428701 is its durable construction. Built with high-quality materials, this chainsaw is designed to withstand the rigors of regular use while maintaining its performance. The bar and chain are designed for longevity, with easy compatibility for replacements when necessary.

In summary, the Poulan 428701,96198002601 chainsaw is a reliable and efficient tool that combines power, safety, and ease of use. With features such as a powerful engine, tool-less chain tensioning, low vibration, and a focus on user comfort, it caters to a wide range of cutting needs, making it a worthwhile addition to any toolkit. Whether for home landscaping or professional use, this chainsaw delivers performance that users can trust.