MAINTENANCE

AUGER GEAR CASE

The gear case was filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction wheel and damage to the drive system of your snow thrower.

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Changetheoilafterevery25hoursofoperationoratleastonce a year if the snow thrower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil fill cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classification SG–SL.

Be sure snow thrower is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

1.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Be sure to install klik pin into proper hole in wheel axle (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

7.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

9.Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep snow thrower housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

WARNING: Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with plug.

Keep finished surfaces/wheels free of gasoline, oil, etc.

We do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

15

Page 15
Image 15
Poulan 96192003502, 436838 owner manual Engine, Cleaning

96192003502, 436838 specifications

The Poulan 436838, also known as the 96192003502, is a powerful and versatile chainsaw designed for both homeowners and professionals. Built to tackle a variety of cutting tasks, this model is a reliable choice for anyone looking to handle yard work or larger outdoor projects.

One of the standout features of the Poulan 436838 is its robust engine. The chainsaw is powered by a high-performing two-stroke engine that provides a balance of power and efficiency. This engine is designed for optimal performance, enabling the chainsaw to handle even the toughest cutting jobs with ease. The power output allows users to cut through hardwoods and dense materials without excessive effort.

In addition to its powerful engine, the Poulan 436838 also boasts an easy-to-use starting system. Equipped with a Prime and Pull starting mechanism, it ensures that users can start the chainsaw with minimal hassle. This feature is particularly beneficial for those who may not be experienced with chainsaws, offering them a straightforward way to get started.

Another significant characteristic of the Poulan 436838 is its lightweight design. Weighing in at just under ten pounds, this chainsaw is manageable for extended periods, reducing user fatigue during operation. The ergonomic handle ensures a comfortable grip, allowing for better control while cutting. This thoughtful design makes it suitable for various users, including those who might not have prior chainsaw experience.

The chainsaw also features an Oregon bar and chain, which enhances its cutting efficiency and durability. The 16-inch bar length provides ample cutting capacity for a wide range of tasks, from pruning branches to felling small trees. The low-kickback design of the chain ensures safer usage, minimizing the risk of accidents while cutting.

Maintenance is made simple with the Poulan 436838, thanks to its tool-less chain tensioning system. Users can easily adjust the chain’s tension without the need for additional tools, allowing for quick and efficient maintenance. This feature ensures that the chainsaw remains in peak operating condition with minimal effort.

In summary, the Poulan 436838,96192003502 is a well-rounded chainsaw that combines power, ease of use, and efficient design. With its impressive features such as a reliable engine, ergonomic design, and convenience-focused maintenance options, it stands out as a practical choice for any cutting task. Whether you’re a seasoned professional or a beginner in yard work, this chainsaw can meet your needs effortlessly.