IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always remove safety igni- tion key and disconnect spark plug wire and place it where it cannot contact plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting the engine (motor).

3.Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot en- gine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller housing or discharge chute, and when making any

2

repairs, adjustments or inspections.

 

Page 2
Image 2
Poulan 436838, 96192003502 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

96192003502, 436838 specifications

The Poulan 436838, also known as the 96192003502, is a powerful and versatile chainsaw designed for both homeowners and professionals. Built to tackle a variety of cutting tasks, this model is a reliable choice for anyone looking to handle yard work or larger outdoor projects.

One of the standout features of the Poulan 436838 is its robust engine. The chainsaw is powered by a high-performing two-stroke engine that provides a balance of power and efficiency. This engine is designed for optimal performance, enabling the chainsaw to handle even the toughest cutting jobs with ease. The power output allows users to cut through hardwoods and dense materials without excessive effort.

In addition to its powerful engine, the Poulan 436838 also boasts an easy-to-use starting system. Equipped with a Prime and Pull starting mechanism, it ensures that users can start the chainsaw with minimal hassle. This feature is particularly beneficial for those who may not be experienced with chainsaws, offering them a straightforward way to get started.

Another significant characteristic of the Poulan 436838 is its lightweight design. Weighing in at just under ten pounds, this chainsaw is manageable for extended periods, reducing user fatigue during operation. The ergonomic handle ensures a comfortable grip, allowing for better control while cutting. This thoughtful design makes it suitable for various users, including those who might not have prior chainsaw experience.

The chainsaw also features an Oregon bar and chain, which enhances its cutting efficiency and durability. The 16-inch bar length provides ample cutting capacity for a wide range of tasks, from pruning branches to felling small trees. The low-kickback design of the chain ensures safer usage, minimizing the risk of accidents while cutting.

Maintenance is made simple with the Poulan 436838, thanks to its tool-less chain tensioning system. Users can easily adjust the chain’s tension without the need for additional tools, allowing for quick and efficient maintenance. This feature ensures that the chainsaw remains in peak operating condition with minimal effort.

In summary, the Poulan 436838,96192003502 is a well-rounded chainsaw that combines power, ease of use, and efficient design. With its impressive features such as a reliable engine, ergonomic design, and convenience-focused maintenance options, it stands out as a practical choice for any cutting task. Whether you’re a seasoned professional or a beginner in yard work, this chainsaw can meet your needs effortlessly.