SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shear bolt and hex nut. Should a foreign ob- ject or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

FRAME

BELT COVER

SCREWS

FIG. 20

16

Page 16
Image 16
Poulan 436838, 96192003502 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

96192003502, 436838 specifications

The Poulan 436838, also known as the 96192003502, is a powerful and versatile chainsaw designed for both homeowners and professionals. Built to tackle a variety of cutting tasks, this model is a reliable choice for anyone looking to handle yard work or larger outdoor projects.

One of the standout features of the Poulan 436838 is its robust engine. The chainsaw is powered by a high-performing two-stroke engine that provides a balance of power and efficiency. This engine is designed for optimal performance, enabling the chainsaw to handle even the toughest cutting jobs with ease. The power output allows users to cut through hardwoods and dense materials without excessive effort.

In addition to its powerful engine, the Poulan 436838 also boasts an easy-to-use starting system. Equipped with a Prime and Pull starting mechanism, it ensures that users can start the chainsaw with minimal hassle. This feature is particularly beneficial for those who may not be experienced with chainsaws, offering them a straightforward way to get started.

Another significant characteristic of the Poulan 436838 is its lightweight design. Weighing in at just under ten pounds, this chainsaw is manageable for extended periods, reducing user fatigue during operation. The ergonomic handle ensures a comfortable grip, allowing for better control while cutting. This thoughtful design makes it suitable for various users, including those who might not have prior chainsaw experience.

The chainsaw also features an Oregon bar and chain, which enhances its cutting efficiency and durability. The 16-inch bar length provides ample cutting capacity for a wide range of tasks, from pruning branches to felling small trees. The low-kickback design of the chain ensures safer usage, minimizing the risk of accidents while cutting.

Maintenance is made simple with the Poulan 436838, thanks to its tool-less chain tensioning system. Users can easily adjust the chain’s tension without the need for additional tools, allowing for quick and efficient maintenance. This feature ensures that the chainsaw remains in peak operating condition with minimal effort.

In summary, the Poulan 436838,96192003502 is a well-rounded chainsaw that combines power, ease of use, and efficient design. With its impressive features such as a reliable engine, ergonomic design, and convenience-focused maintenance options, it stands out as a practical choice for any cutting task. Whether you’re a seasoned professional or a beginner in yard work, this chainsaw can meet your needs effortlessly.