6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufac- tured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

3.0 Quarts (2,83 Liters)

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 5W-30 or 10W-30

(API SG–SL):

Synthetic SAE 5W-30

 

 

Oil Capacity:

28 Ounces (0,82 Liters)

 

 

Spark Plug:

Champion QC12YC

Gap:

0.030" (0,762 mm)

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY / PRE-OPERATION

4-7

OPERATION

8-13

MAINTENANCE SCHEDULE

14

MAINTENANCE

14-15

SERVICE AND ADJUSTMENTS

16-18

STORAGE

19

TROUBLESHOOTING

20

REPAIR PARTS

22-40

3 WARRANTY

BACK PAGE

Page 2 Page 4
Page 3
Image 3
Poulan 96192003502, 436838 owner manual Table of Contents
Page 2 Page 4

96192003502, 436838 specifications

The Poulan 436838, also known as the 96192003502, is a powerful and versatile chainsaw designed for both homeowners and professionals. Built to tackle a variety of cutting tasks, this model is a reliable choice for anyone looking to handle yard work or larger outdoor projects.

One of the standout features of the Poulan 436838 is its robust engine. The chainsaw is powered by a high-performing two-stroke engine that provides a balance of power and efficiency. This engine is designed for optimal performance, enabling the chainsaw to handle even the toughest cutting jobs with ease. The power output allows users to cut through hardwoods and dense materials without excessive effort.

In addition to its powerful engine, the Poulan 436838 also boasts an easy-to-use starting system. Equipped with a Prime and Pull starting mechanism, it ensures that users can start the chainsaw with minimal hassle. This feature is particularly beneficial for those who may not be experienced with chainsaws, offering them a straightforward way to get started.

Another significant characteristic of the Poulan 436838 is its lightweight design. Weighing in at just under ten pounds, this chainsaw is manageable for extended periods, reducing user fatigue during operation. The ergonomic handle ensures a comfortable grip, allowing for better control while cutting. This thoughtful design makes it suitable for various users, including those who might not have prior chainsaw experience.

The chainsaw also features an Oregon bar and chain, which enhances its cutting efficiency and durability. The 16-inch bar length provides ample cutting capacity for a wide range of tasks, from pruning branches to felling small trees. The low-kickback design of the chain ensures safer usage, minimizing the risk of accidents while cutting.

Maintenance is made simple with the Poulan 436838, thanks to its tool-less chain tensioning system. Users can easily adjust the chain’s tension without the need for additional tools, allowing for quick and efficient maintenance. This feature ensures that the chainsaw remains in peak operating condition with minimal effort.

In summary, the Poulan 436838,96192003502 is a well-rounded chainsaw that combines power, ease of use, and efficient design. With its impressive features such as a reliable engine, ergonomic design, and convenience-focused maintenance options, it stands out as a practical choice for any cutting task. Whether you’re a seasoned professional or a beginner in yard work, this chainsaw can meet your needs effortlessly.
Top Page Image Contents