Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter. Low-- Kickback Chain has met kickback per- formance requirements when tested on a representative sample of chain saws be- low 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Elongated Guard Link

 

 

 

 

 

 

 

 

 

 

 

 

 

Deflects

Low---Kickback

 

 

 

Kickback Force

 

 

 

And Allows Wood

Chain

 

 

 

 

 

 

To Gradually

 

 

 

 

 

 

 

 

 

 

 

 

 

Ride Into Cutter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Can Obstruct Material

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Not a Low---Kickback Chain

SFront Hand Guard, designed to reduce the

chance of your left hand contacting the chain if your hand slips off the front handlebar.

SPosition of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in-line” position of the hands provided by this design work together to give balance and resistance in controlling the pivot of the saw back toward the operator if kick- back occurs.

CHAIN BRAKE AND CKA ANGLE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK. Kickback is a lightning fast ac- tion which throws the bar and rotating chain back and up toward the operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This

Computed kickback angle (CKA) Table

action may push the guide bar rapidly back toward the operator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Re- duced--kickback guide bars and low--kick- back saw chains reduce the chance and magnitude of kickback and are recom- mended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a ser- vicing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light- ning fast reverse REACTION, kicking the guide bar up and back toward the operator.

SPinching the saw chain along the top of the

guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury.Do not rely exclusively upon the safety devices built into your saw.

WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA and ANSI standards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values represent safer angles to the user, higher values indicate more angle and higher kick energies. Computed angles represented in the non-activated column in- dicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain stopping time relative to activation angle of chain brake and resulting kick angle of saw. In all cases lower CKA values represent a safer operating environment for the user. The following guide bar and chain combina- tions meet kickback requirements of CSA Z62.1, Z62.3, & ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

 

BAR

 

 

 

CKA without chain brake

 

MODEL

P/N

Length

 

CHAIN P/N

 

221

530044834

16!

 

530051480

8_

 

NOTE: If this saw is to be used for commer-

SAFETY NOTICE: Exposure to vibrations

cial logging, a chain brake is required and shall

through prolonged use of gasoline powered

not be removed or otherwise disabled to com-

hand tools could cause blood vessel or nerve

ply with Federal OSHA Regulations for Com-

damage in the fingers, hands, and joints of

mercial Logging. Contact your authorized ser-

people prone to circulation disorders or

vice dealer or call 1--800--554--6723.

abnormal swellings. Prolonged use in cold

5

Page 4 Page 6
Page 5
Image 5
Poulan 530086595 Chain Brake and CKA Angle, Computed kickback angle CKA Table, Front Hand Guard, designed to reduce
Page 4 Page 6

530086595 specifications

The Poulan 530086595 is a robust and reliable chainsaw designed for both casual users and seasoned professionals. Renowned for its durability and powerful performance, this chainsaw is a preferred choice for those looking to tackle tasks ranging from light pruning to heavy-duty cutting.

One of the standout features of the Poulan 530086595 is its powerful engine. Equipped with a reliable 42cc gas engine, this chainsaw delivers enough power to handle even the most challenging cutting jobs. The engine provides a perfect balance of efficiency and performance, allowing users to cut through wood with ease and precision. This power also ensures that users can work longer hours without worrying about the chainsaw overheating or losing performance.

The design of the Poulan 530086595 is user-centric, featuring an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. Additionally, the chainsaw is lightweight, making it easy to maneuver and control. This feature is particularly beneficial for users who need to work in various positions, whether on the ground or elevated.

Another significant characteristic of this chainsaw is its easy-start technology. The Poulan 530086595 incorporates a starting system that minimizes the effort required to start the engine, which is especially advantageous for novice users or in cold weather conditions. This feature ensures that users can get to work quickly without the frustration often associated with starting gas-powered chainsaws.

Safety is a paramount consideration in the design of the Poulan 530086595. It includes essential safety features such as a chain brake and a throttle lock, which help prevent accidental starts and ensure the safety of the operator during use. These features are crucial for maintaining peace of mind while working, especially in demanding environments.

The Poulan 530086595 also boasts an automatic oiling system, which ensures that the chain remains lubricated during operation, reducing wear and tear and extending the life of the saw. This system not only enhances performance but also simplifies maintenance, allowing users to focus on their cutting tasks rather than worrying about the upkeep of the chainsaw.

In summary, the Poulan 530086595 is a versatile chainsaw that combines power, ease of use, and safety features, making it an excellent choice for a wide range of cutting needs. Whether for residential landscaping or professional logging tasks, this chainsaw is equipped to deliver exceptional performance and value.
Top Page Image Contents