NOTE: Before felling cut is complete, use wedges to open the cut when necessary to control the direction of fall. To avoid kickback and chain damage, use wood or plastic wedges, but never steel or iron wedges.

SBe alert to signs that the tree is ready to fall:

cracking sounds, widening of the felling cut, or movement in the upper branches.

SAs tree starts to fall, stop saw, put it down, and get away quickly on your planned re- treat path.

S DO NOT cut down a partially fallen tree with your saw. Be extremely cautious with partially fallen trees that may be poorly supported. When a tree doesn’t fall com- pletely, set the saw aside and pull down the tree with a cable winch, block and tackle, or tractor.

CUTTING A FALLEN TREE

(BUCKING)

Bucking is the term used for cutting a fallen tree to the desired log size.

WARNING: Do not stand on the log being cut. Any portion can roll causing loss of footing and control. Do not stand downhill of the log being cut.

IMPORTANT POINTS

SCut only one log at a time.

SCut shattered wood very carefully; sharp pieces of wood could be flung toward oper- ator.

SUse a sawhorse to cut small logs. Never allow another person to hold the log while

cutting and never hold the log with your leg or foot.

S Do not cut in an area where logs, limbs, and roots are tangled such as in a blown down area. Drag the logs into a clear area before cutting by pulling out exposed and cleared logs first.

TYPES OF CUTTING USED FOR BUCKING

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Re- start the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pres- sure.

Overcutting Undercutting

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A

SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a second overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustration for cutting logs with a compres- sion side.

BUCKING USING A LOG OR

SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustration below for your first

and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

12

Page 11 Page 13
Page 12
Image 12
Poulan 530086595 instruction manual Cutting a Fallen Tree, Types of Cutting Used for Bucking, Bucking Without a Support
Page 11 Page 13

530086595 specifications

The Poulan 530086595 is a robust and reliable chainsaw designed for both casual users and seasoned professionals. Renowned for its durability and powerful performance, this chainsaw is a preferred choice for those looking to tackle tasks ranging from light pruning to heavy-duty cutting.

One of the standout features of the Poulan 530086595 is its powerful engine. Equipped with a reliable 42cc gas engine, this chainsaw delivers enough power to handle even the most challenging cutting jobs. The engine provides a perfect balance of efficiency and performance, allowing users to cut through wood with ease and precision. This power also ensures that users can work longer hours without worrying about the chainsaw overheating or losing performance.

The design of the Poulan 530086595 is user-centric, featuring an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. Additionally, the chainsaw is lightweight, making it easy to maneuver and control. This feature is particularly beneficial for users who need to work in various positions, whether on the ground or elevated.

Another significant characteristic of this chainsaw is its easy-start technology. The Poulan 530086595 incorporates a starting system that minimizes the effort required to start the engine, which is especially advantageous for novice users or in cold weather conditions. This feature ensures that users can get to work quickly without the frustration often associated with starting gas-powered chainsaws.

Safety is a paramount consideration in the design of the Poulan 530086595. It includes essential safety features such as a chain brake and a throttle lock, which help prevent accidental starts and ensure the safety of the operator during use. These features are crucial for maintaining peace of mind while working, especially in demanding environments.

The Poulan 530086595 also boasts an automatic oiling system, which ensures that the chain remains lubricated during operation, reducing wear and tear and extending the life of the saw. This system not only enhances performance but also simplifies maintenance, allowing users to focus on their cutting tasks rather than worrying about the upkeep of the chainsaw.

In summary, the Poulan 530086595 is a versatile chainsaw that combines power, ease of use, and safety features, making it an excellent choice for a wide range of cutting needs. Whether for residential landscaping or professional logging tasks, this chainsaw is equipped to deliver exceptional performance and value.
Top Page Image Contents