TANDBERG D14128.02 manual Best view-Face recognition, Using Best view, Codec C90, Best view beta

Codec C90

Contents Introduction Getting Started Interfaces

Best view—Face recognition

This camera is capable of face recognition when used with TANDBERG C90 Codecs. Consequently, the functionality is subject to change without further notice in order to take advantage of further developments.

NOTE: Observe that the Best view feature is still a preview feature.

The face recognition system aims to search for faces in order to optimize the picture frame, hence the name Best view. Once a face or group of faces has been detected camera zoom and camera angle will be changed accordingly to obtain an optimal presentation on the screen.

Kindly observe the following:

System Integrator Guide

About the API xConfiguration xCommand xStatus CamerasCameras Appendices Contact us

•The Best view optimization process may take up to 5 seconds.

•The detection of faces works better when people look towards the camera.

•The area from the eyebrows down to just below the lips should be uncovered.

•Beard is normally not a problem.

Using Best view

Note that Best view works with TANDBERG C90 Codecs only!

The Best view feature is found in the Camera control menu.

Best view (beta) Exit

Press the corresponding Soft key to start the Best view optimization process.

1.Press the Layout key on the remote control to display the Layout menu. Select Selfview to be shown as required.

2.Press the Home key on the remote control to display the Home menu and select Camera control

3.In the Camera control menu, locate the Best view button at the bottom of the screen.

4.Press the corresponding Soft key on the remote control to start the Best view optimization process. Look towards the camera for about five seconds.

5.The system will now look for human faces and adjust the zoom and camera angle to obtain a best fit.

1 .@	2 abc	def 3
4 ghi	5 jkl	mno 6
7 pqrs	8 tuv	wxyz 9
	0	abc/123 #

D14128.02—NOVEMBER 2008 108