TANDBERG D14128.02 manual Query status information, Codec C90, System Integrator Guide

Codec C90

Contents Introduction Getting Started Interfaces

System Integrator Guide

AboutAboutthetheAPIAPI xConfiguration xCommand xStatus Cameras Appendices Contact us

Query status information

Status type commands returns information about the system and system processes. You can query all information or just some of it.

To address status information enter the xStatus command followed by an address expression (XPath or TANDBERG SimplePath).

You can set up the xStatus read command to address all information or just some of it, see the examples to the right for illustrations.

Address status information with xStatus

To read status from the system just type the root command (xStatus) followed by the path (address expression): xStatus <address expression>

Example 1: Query all ongoing Call information:

xstatus call

*s Call 8 Status: Connected

*s Call 8 Direction: Outgoing

*s Call 8 Protocol: “h323”

*s Call 8 RemoteNumber: “558458”

*s Call 8 CallbackNumber: “h323:jon.nordal.office@tandberg.com”

*s Call 8 DisplayName: “jon.nordal.office@tandberg.com”

*s Call 8 CallRate: 768

*s Call 8 Encryption Type: “Aes-128”

OK

Example 2: Query the protocol for a call: xstatus call protocol

*s Call 8 Protocol: “h323”

OK

D14128.02—NOVEMBER 2008 45