TANDBERG D14128.02 manual Far End Control commands, XCommand FarEndControl Camera Move

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration

System Integrator Guide

xCommandxCommand xStatus Cameras Appendices Contact us

The Far End Control commands

xCommand FarEndControl Camera Move

Move far end camera.

Required parameters with (r):

CallId(r): <0..65534>

Value(r): <Left/Right/Up/Down/ZoomIn/ZoomOut>

Example:

xCommand FarEndControl Camera Move CallId:3 Value:left *r FECCMoveResult (status=OK):

*r/end

xCommand FarEndControl Preset Activate

Activate move of far end camera to preset position.

Required parameters with (r):

CallId(r): <0..65534>

PresetId(r): <1..15>

Example:

xCommand FarEndControl Preset Activate CallId:3 PresetId:1 *r FECCPresetActivateResult (status=OK):

*r/end

OK

xCommand FarEndControl Camera Stop

Stop far end control move.

Required parameters with (r):

CallId(r): <0..65534>

Example:

xCommand FarEndControl Camera Stop CallId:3 *r FECCMoveResult (status=OK):

*r/end

xCommand FarEndControl Preset Store

Store position of far end camera.

Required parameters with (r):

CallId(r): <0..65534>

PresetId(r): <0..15>

Example:

xCommand FarEndControl Preset Store CallId:3 PresetId:1 *r FECCPresetStoreResult (status=OK):

*r/end

OK

D14128.02—NOVEMBER 2008 73