TANDBERG D14128.02 The Boot command, The Call commands, xCommand Boot, xCommand Call Disconnect

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration

System Integrator Guide

xCommandxCommand xStatus Cameras Appendices Contact us

The Boot command

xCommand Boot

Boot system.

Example:

xCommand Boot

*r BootResult (status=OK): *r/end

OK

CUIL reboot request, restarting Connection closed by foreign host.

The Call commands

xCommand Call Disconnect

Disconnect specified call.

Required parameters with (r):

CallId(r): <0..65534>

Example:

xCommand Call Disconnect CallId:17

OK

*r DisconnectCallResult (status=OK): *r/end

xCommand Call DisconnectAll

Disconnect all calls.

Example:

xCommand Call DisconnectAll

OK

*r DisconnectAllResult (status=OK): *r/end

xCommand Call Accept

Accept incoming call. If no call id is specified, all incoming calls will be accepted. Required parameters with (r):

CallId: <0..65534>

Example:

xCommand Call Accept CallId:19

OK

*r CallAcceptResult (status=OK): *r/end

D14128.02—NOVEMBER 2008 67