TANDBERG D14128.02 manual The Dial command, xCommand Camera ReconfigureCameraChain, xCommand Dial

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration

System Integrator Guide

xCommandxCommand xStatus Cameras Appendices Contact us

xCommand Camera ReconfigureCameraChain

Reinitialize camera chain. Get info about what camera is sitting in what position in the camera chain.

Example:

xCommand Camera ReconfigureCameraChain

*r ReconfigureCameraChainResult (status=OK): *r/end

OK

xCommand Camera TriggerAutofocus

Trigger auto focus.

Required parameters with (r):

CameraId(r): <1..7>

Example:

xCommand Camera TriggerAutofocus CameraId:1

OK

*r TriggerAutofocusResult (status=OK): *r/end

The Dial command

xCommand Dial

Dial out from the system.

Required parameters with (r):

Number(r): <S: 0, 255>

Protocol: <H323/Sip>

CallRate: <64..6000>

Example:

xCommand Dial Number:543210 Protocol:h323

OK

*r DialResult (status=OK): CallId: 2 ConferenceId: 1

*r/end

D14128.02—NOVEMBER 2008 71