TANDBERG D14128.02 manual Connecting the camera, HDMI cable, HD-SDI cable, HDMI to DVI-D adapter

VISCA™ is a trademark of Sony Corporation

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus

System Integrator Guide

CamerasCameras Appendices Contact us

Connecting the camera

The HDMI and HD-SDI can be used simultaneously.

HDMI cable

The HDMI cable delivered with the camera is 5 meters.

Maximum length is 15 meter with a category 2 certified good quality HDMI cable.

HD-SDI cable

The HD-SDI cable must be purchased separately. The maximum recommendable length of HD SDI cable is 100 m.

HDMI to DVI-D adapter

The HDMI to DVI-D adapter is used when connecting to a TANDBERG MXP codec or TANDBERG Video Switch

Power supply connection is NOT needed when the camera is used with a TANDBERG Codec.

HD-SDI socket

HDMI and HD-SDI

can be used simultaneously.

Connect the camera control cable, RJ45 to RS-232. Visca™ protocol is supported.

Connecting HDMI HD Video out on camera to HDMI 1 In on the Codec.

If you need to connect the camera to a TANDBERG Video Switch or to a system with a DVI-D socket, use the enclosed HDMI to DVI-D adapter.

D14128.02—NOVEMBER 2008 107