TANDBERG D14128.02 manual Line Out 1-4 RCA

Codec C90 System Integrator Guide

Contents Introduction Getting Started

InterfacesInterfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us

Audio outputs (II)

Line Out 1–4 (RCA)

4 x RCA sockets, audio output 1-4 Can be configured as two stereo pairs.

Main connectors. Line Out 1 (left) and Line Out 2 (right) are the main connectors to the local loudspeaker system.

The local loudspeaker system may or may not include the TANDBERG DNAM (Digital Natural Audio Module).

Default configuration Line Out 1-2. In default configuration, Line Out 1 and 2 are configured as stereo speakers.

if a DNAM is present or SPDIF is active on Line Out 1, then Line Out 1 provides a digital stereo speaker signal and Line Out 2 is not active.

Default configuration Line Out 3-4. In default configuration, Line Out 3 and 4 are configured as stereo line out for external recording devices as VCR’s or DVD recorders.

4 x Line Out

if a DNAM is present or SPDIF is active on Line Out 3, then Line Out 3 provides a digital stereo speaker signal and Line Out 4 is not active.

SPDIF - Sony/Philips Digital Interface, used by the Digital Natural Audio Module.

RCA pin-out

External view of socket

SignalGND

RCA - Phono Plug (the Radio Corporation of America)

What is a Line output

A Line output consists of all signals from local side and all signals from far end side.

What is a Speaker output

A Speaker output consists of all signals from local side, except microphones, and all signals from far end side.

Left channel

The Left channel consists of all Left channel and Mono signals.

Right channel

The Right channel consists of all Right channel and Mono signals.

D14128.02—NOVEMBER 2008 25