TANDBERG D14128.02 manual xCommand Camera PositionSet, xCommand Camera Ramp, Codec C90

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration

System Integrator Guide

xCommandxCommand xStatus Cameras Appendices Contact us

xCommand Camera PositionSet

Set camera position to specified values.

Required parameters with (r):

CameraId(r): <1..7>

Pan: <-65535..65535>

Tilt: <-65535..65535>

Zoom: <0..65535>

Focus: <0..65535>

Example:

xCommand Camera PositionSet CameraId:1 Pan:200 Tilt:300

OK

*r CameraPositionSetResult (status=OK): *r/end

xCommand Camera Ramp

Move camera in specified direction. Camera will move at specified speed until stop command is issued. Required parameters with (r):

CameraId(r): <1..7>

Pan: <Left/Right/Stop>

PanSpeed: <1..15>

Tilt: <Down/Stop/Up>

TiltSpeed: <1..15>

Zoom: <In/Out/Stop>

ZoomSpeed: <1..15>

Focus: <Far/Near/Stop>

Example:

xCommand Camera Ramp CameraId:1 Pan:left PanSpeed:1

OK

*r RampResult (status=OK): *r/end

xCommand Camera Ramp CameraId:1 Pan:stop

OK

*r RampResult (status=OK): *r/end

D14128.02—NOVEMBER 2008 70