TANDBERG D14128.02 manual The Preset commands, xCommand Preset Activate, xCommand Preset Store

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration

The Preset commands

System Integrator Guide

xCommandxCommand xStatus Cameras Appendices Contact us

xCommand Preset Activate	xCommand Preset Store
Activate local preset. Will move camera to predefined position.	Store current camera position. System may hold 15 predefined camera positions (presets).
Required parameters with (r):	Required parameters with (r):
PresetId(r): <1..15>	PresetId(r): <1..15>
Example:	Type(r): <All/Camera>
xCommand Preset Activate PresetId:3	Description(r): <S: 0, 255>
	Example:
OK	xCommand Preset Store PresetId:3 Type:Camera Description:”Left view”
*r PresetActivateResult (status=OK):
*r/end	OK
	*r PresetStoreResult (status=OK):
	*r/end

xCommand Preset Clear

Delete a preset storing a camera position.

Required parameters with (r):

PresetId(r): <1..15>

Example:

xCommand Preset Clear PresetId:3

OK

*r PresetClearResult (status=OK): *r/end

D14128.02—NOVEMBER 2008 77