TANDBERG D14128.02 manual Line In 1-4 RCA, RCA pin-out

Codec C90 System Integrator Guide

Contents Introduction Getting Started

InterfacesInterfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us

Audio inputs (II)

Unused, but connected audio inputs should be set to Off to avoid unwanted audio/noise.

Line In 1–4 (RCA)

4 x RCA sockets, audio input 1–4

Audio Line In 1–4 are used when connecting to PC and to external playback devices, such as VCR’s or DVD players.

Main connectors. The Line In 1 (left) and Line In 2 (right) are the main connectors to a PC.

Stereo. For systems with stereo I/O the audio inputs can be configured in stereo pairs:

•Connect the left channel to Line In 1 or 3

•Connect the right channel to Line In 2 or 4

Default configuration for Line In 1–2. In the default configuration Line In 1 and 2 are configured as stereo inputs for external playback devices, such as a PC.

Default configuration for Line In 3–4. In the default configuration Line In 3 and 4 are configured as stereo input pairs. The two inputs are paired with Line Out 3 and 4 respectively.

This pairing will avoid feedback situations that can arise when playback/recording devices are in standby mode (Loop suppression).

Line In 3 and 4 are used with external playback devices as VCR’s and DVD players.

4 x Line In

RCA pin-out

External view of socket

SignalGND

RCA - Phono Plug (the Radio Corporation of

America)

D14128.02—NOVEMBER 2008 23