TANDBERG D14128.02 manual Rear panel sockets overview, Video sockets, Audio sockets, Other sockets

Codec C90 System Integrator Guide

Contents Introduction Getting Started

InterfacesInterfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us

Rear panel sockets overview

The TANDBERG Codec C90 offers a great flexibility in connecting audio and video equipment to the system.

The illustration below shows the rear panel of the TANDBERG Codec C90.

Inputs	Outputs	TANDBERG Basic
		Setup
		The main connectors
1	1	for TANDBERG basic
		setup are highlighted
		in orange.

*Not supported in version 1

**For future use

Video sockets	Audio sockets	Other sockets
The video input sockets are:	The audio input sockets are:	The other sockets are:
4 x HDMI	8 x XLR Female - Microphone/Line In	Ethernet 1 and Ethernet 2*
4 x HD-SDI	4 x RCA - Line In (1 Left, 2 Right, 3 Left, 4 Right)	COM - Serial data port
2 x DVI-I	2 x HDMI	Camera control - Serial port for camera control
2 x Analog Component (Y-Pr-Pb)		Power socket
1 x Composite* or 1 x S-Video(YC)*	The audio output sockets are:	Grounding - Chassis grounding
	2 x XLR Male - Line Out	Power On/Off switch
The video output sockets are:	4 x RCA - 1 Left (SPDIF), 2 Right, 3 Left	GPIO**, USB Host**, USB Device**, T Link**
2 x HDMI	(SPDIF), 4 Right
2 x DVI-I	2 x HDMI
1 Composite

Codec C90 Rear Panel		The following pages gives a detailed description of the rear panel sockets and connectors.
	Video sockets	Audio sockets

Video sockets		Audio sockets	T Link	Network	COM Port,	Power	Power
	GPIO and USB			interface	Camera	socket	switch
				sockets	Control

D14128.02—NOVEMBER 2008 17