TANDBERG D14128.02 manual Software upgrade, The software upgrade procedure, Codec C90

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras

System Integrator Guide

AppendicesAppendices Contact us

Software upgrade

The Upgrade tab lets you select the software upgrade file for TANDBERG Codec C90 and install the new software.

Please follow the procedure described on this page.

The software upgrade procedure

Contact your TANDBERG representative to obtain the software upgrade file.

1.Open a web browser and enter the IP address to connect to the Codec C90 by HTTP

2.Select the Upgrade tab

3.Click Browse... and locate the upgrade file (.PKG)

4.Click the Install software button to start the installation.

5.Leave the system for a few minutes to allow the installation process to complete. The upgrade process takes about 4–5 minutes.

D14128.02—NOVEMBER 2008 112