TANDBERG D14128.02 manual Camera commands, XCommand Camera BestView, XCommand Camera CameraUpgrade

Codec C90

Contents Introduction Getting Started Interfaces About the API xConfiguration

System Integrator Guide

xCommandxCommand xStatus Cameras Appendices Contact us

The Camera commands

xCommand Camera BestView

Activate the best view function.

Required parameters with (r):

CameraId(r): <1..7>

Duration: <0..65534>

Example:

xCommand Camera BestView CameraId:1 Duration:7

OK

*r BestViewResult (status=OK): *r/end

xCommand Camera CameraUpgrade

Upgrade camera software.

Required parameters with (r):

CameraId(r): <1..7>

Filename(r): <S: 0, 128>

Example:

To be described.

xCommand Camera DirectIRControl

Camera is controlled directly from remote control. Camera does not receive control signals from codec. Required parameters with (r):

CameraId(r): <1..7>

OnOff(r): <On/Off>

Example:

xCommand Camera DirectIRControl CameraId:1 OnOff:on

OK

*r DirectIRControlResult (status=OK): *r/end

xCommand Camera PanTiltReset

Camera pan/tilt values is positioned to predefined value.

Required parameters with (r):

CameraId(r): <1..7>

Example:

xCommand Camera PanTiltReset CameraId:1

OK

*r PanTiltResetResult (status=OK): *r/end

D14128.02—NOVEMBER 2008 69