TANDBERG D14128.02 manual About xPreferences

Codec C90

Contents Introduction Getting Started Interfaces

System Integrator Guide

AboutAboutthetheAPIAPI xConfiguration xCommand xStatus Cameras Appendices Contact us

About xPreferences

The xPreferences command is used to set various preferences for the RS-232/Telnet/SSH sessions.

Each session can define preferences individually.

IMPORTANT! This command has various settings to define the formatting of the XACLI output. It is therefore important to define settings to match the parser used on the control system. XACLI is designed to make parsing of data from the TANDBERG Codec C90 very simple.

xPreferences output mode:

•Terminal: Line based XACLI output for use with line based control systems

•XML: Pure XML output for use with control systems that understand XML. NOTE! This mode is to be considered experimental in version 1 of the software. Its format WILL change in next version.

To get an overview of the supported xPreferences commands and their value space, type ? or help after the xPreferences:

xPreferences ?

xpreferences usage:

xpreferences outputmode <terminal/xml>

OK

•xPreferences ?

•xPreferences help

D14128.02—NOVEMBER 2008 48