> lan>
Command format: dhcpserver <range1 startIP> <range1 endIP> [<range2 startIP> <range2 endIP>]
dhcpserver dns <dns ip1> [<dns ip2>]
Parameter: |
|
|
|
Range1 startIP: | The starting IP address | of the first range. | |
Range1 endIP: | The end IP | address of the first range. | |
Range2 startIP: | The starting IP address | of the second range. | |
Range2 endIP: | The end IP | address of the second range. | |
Lease time | of the address. | ||
Dns ip1: | IP address | of the first | DNS. |
Dns ip2: | IP address | of the second DNS. | |
8.3.4.2 Setdhcp command
The setdhcp command activates or deactivates the DHCP server.
>lan> setdhcp disable DHCP is set to disable.
>lan>
Command format: setdhcp [serverdisable]
Parameter: |
|
|
|
|
Server: | DHCP | server | is | active. |
Disable: | DHCP | server | is | not active. |
8.3.4.3 Setip command
See 8.2.4.1
8.3.4.4 Show command
The show command displays the configuration of the
lan> show
Ethernet ip: 198.24.67.20
Subnet mask: 255.255.255.0
DHCP current setting : disable.
DHCP ineffective setting : disable.
Version: 1.0 | Page. 67 of 95 |
