Parameter: |
|
Delpvc: | See 8.2.10.1 |
Pfilter: | See 8.2.10.2 |
Setpvc: | See 8.2.10.3 |
Setqos: | See 8.2.10.4 |
Setspan: | See 8.2.10.5 |
Show: | See 8.2.10.6 |
8.2.10.1Delpvc command
The delpvc allows to delete one or all PVCs.
>r1483> delpvc all
>r1483>
Command format: delpvc <all>[<vpi>/]<vci>
Parameter: |
|
|
All: | Deletes | all PVCs. |
VPI/VCI: | Deletes | a PVC with a VPI/VCI number. |
8.2.10.2Pfilter command
The pfilter command sets the packet filter for the mentioned PVC.
>r1483> pfilter 8/35 ip
>r1483>
Command format: pfilter [<vpi>/]<vci> <anyippppoeigmpnone>
Parameter: |
|
VPI/VCI: | Sets PVC with the VPI/VCI number. |
Any: | This PVC passes any packet. |
Ip: | This PVC passes only IP packet. |
Pppoe: | This PVC passes only PPPoE packet. |
Igmp: | This PVC passes only IGMP packet. |
None: | This PVC does not pass packets. |
Note! The pfilter command changes the PVC parameters, first configured by the quick command (see 8.2.9) or setpvc command (see 8.2.10.3). If the mentioned PVC is not found, the system displays an error message.
8.2.10.3Setpvc command
The setpvc command activates PVC with a mentioned address.
Version: 1.0 | Page. 55 of 95 |