Parameter Usages:

-print

print current IP setting and status

-ip

assigned IP address for SP5001/S

-mask

internet subnet mask

-gate

IP default gateway

-dhcp

Dynamic Host Configuration (1 = ON; 0 = OFF)

-sntp

Simple Network Time Protocol (1 = ON; 0 = OFF) When SNTP

 

function is activated, users have to specify a SNTP server as

 

network time source. An example is demonstrated below:

-dns

Specify Primary (-dns 1) or Secondary (-dns 2) DNS Server IP

address.

 

 

 

 

usr/config$

ifaddr -dns 1 168.95.1.1

usr/config$

ifaddr -dns 2 203.23.123.2

-timezone

set local time zone according to GMT

usr/config$ ifaddr -sntp 1 10.1.1.1

While 10.1.1.1 stands for SNTP server’s IP address.

-ipsharing

To specify a global fixed IP address, user can add this IP address

 

in the command.

 

usr/config$ ifaddr -ipsharing 1 210.11.22.33

-upnp

Enable/ Disable UPnP function. If IP sharing has this function, use

 

can enable upnp function that user doesn’t need to configure

 

gateway or IP sharing for NAT function.

usr/config$ ifaddr -print

Internet address information

IP address

: 192.168.4.72

Subnet mask

: 255.255.0.0

Default gateway

: 192.168.1.254

DHCP startup

: OFF

SNTP

: mode=1

 

server 168.95.195.12

 

time zone : GMT+8

 

cycle=1024 mins

IPSharing

: no IPSharing device.

Primary DNS Server

: 168.95.1.1

Secondary DNS Server : 168.95.1.1 usr/config$

Figure 45. ifaddr –print command list

68

Page 69
Image 69
MicroNet Technology SP5001/S user manual Ifaddr -print command list