6.Network Interface Screen
Click Network Interface in the navigation panel and open the Network Interface Screen.
Use this screen to setup Network Interface identification information for SP5001/S.
Figure 17. Network Interface
The following table describes this screen.
|
| Table 3. H323 Configuration |
|
|
|
| LABEL | DESCRIPTION |
| IP Address | Enter the IP Address of SP5001/S in dotted decimal notation for e.g. |
|
| 192.168.4.92. Range of IP Address setting (0.0.0.0~255.255.55.255). |
|
|
|
| Subnet Mask | Enter the IP Subnet Mask of your SP5001/S in dotted decimal notation for |
|
| e.g. 255.255.0.0. |
|
|
|
| Default Routing | Enter the IP Address of the |
| Gateway | dotted decimal notation for e.g. 192.168.1.254. |
|
|
|
| DHCP | Select enable/disable Dynamic Host Configuration. |
|
|
|
| DNS primary | Enter the DNS IP Address in dotted decimal notation for e.g. 168.95.1.1 |
|
|
|
| DNS Secondary | Enter the DNS secondary IP Address in dotted decimal notation for e.g. |
|
| 168.95.1.1 |
|
|
|
| SNTP | Select enable/disable Simple Network Time Protocol. |
|
|
|
|
|
|
|
| 33 |
