MicroNet Technology SP5001/S user manual Flash command list

19.7.4[flash]

Save changes after configuring SP5001/S.

usr/config$ flash

Flash memory information and configuration Usage:

flash -clean

Note:

This command will clean the configuration stored in the flash and reboot it.

usr/config$

Figure 41. flash command list

Parameter Usages:

-clean clean all the user defined value, and reboot SP5001/S in factory default mode.

Note: It is recommended that use “flash –clean” after application firmware id

upgraded.

Warning: It is only executed by user whose login name is root. All configurations in command [ifaddr], [pppoe] will be kept

usr/config$ flash -clean

Flash clean start

Flash clean success!!

!! rebooting ...

Attached TCP/IP interface to cpm unit 0 Attaching interface lo0...done

HTTPD initialized...

Flash Check

WorkMode : PROXY_MODE

Start registering to Proxy server

AC4804[0] is ok successful 1 2

Initialize OSS libraries...OK! VP v1.42 stack open successfully.

login:

Figure 42. flash –clean command list

66