ZyXEL Communications omni series user manual Command Options Function & Description

Command	Options	Function & Description	Ref.
A>		Re-execute the last command once
		or repeat the last call up to 9 times.
		(See also S8)
<any key>		Terminate current connection
		attempt when enter in handshaking
		state.
+++		Escape sequence code, entered in
		data state, wait for TA to return to
		command state.
All the Following Commands Require a “AT” Prefix
A		Go on-line in answer mode. (See
		also S39.2, S43.6)
ATA		Return to command state.
ATABn	B1	Set B1 for leased line in answer
		mode.
	B2	Set B2 for leased line in answer
		mode.
	B3	Set B1 & B2 for leased line in
		answer mode.
Bnn		Select ISDN Teleservice	S82
		'B' must be followed by two digits.	S102
	B0n	X.75
	B00	X.75 Transparent
	B01	X.75 T.70
	B04	BTX (Data X-J)
	B10	V.110 user rate follows DTE speed
		(async.) or V.110 user rate
		determined by in-band negotiation
		(sync.)
	B11	V.110 user rate = 64000 bps (sync	S117
		mode).
	B13	V.110 user rate = 2400 bps.
	B14	V.110 user rate = 4800 bps.
	B15	V.110 user rate = 9600 bps.

110 AT Command Set Reference