ZyXEL Communications omni series user manual Feature Phone omni.net, Flash key, InterCom

Feature Phone (omni.net)

The omni.net supports ZyXEL’s powerful and advanced feature phone operation. By connecting to the analog ports, you can get the benefits of analog phone services, plus additional features over your ISDN line.

The Flash key

All feature phone operations start from the Flash key. Commands for feature phone operation are listed in the table below:

Commands	Description
Press the Flash key.	1.	Hold/Release.
	2.	Cancel the second dial connection attempt
Press the Flash key	1.	Answer the incoming call and place the
and 0 (call waiting).	existing call on hold.
	2.	Switch back and forth between the two
	calls; either two remote calls or one remote
	call and one local call.
	3.	Place a call on hold to place a second call.
Press the Flash key	1.	Dial to another local phone.
and 2 (Intercom and	2.	Transfer the call to another local phone.
Call Transfer).
Press the Flash key	Create three-way conference connection in
and 3 (Three-way	Mixing mode (1 remote party and 2 local
conference)	parties or 2 remote parties and 1 local party).
Press the Flash key	1.Reject the second incoming call.
and 5 (Call Reject).	2.Disconnect the current phone connection.

InterCom

With two phones connected, your TA can be used as an intercom. Please follow the instructions below:

1.Pick up the telephone handset.

2.Press the Flash key and then press 2 on the phone keypad. The other local phone will start to ring.

Handling Analog Calls (non-data) 75