ZyXEL Communications omni series user manual Command Bit Dec Hex Function and description

Command	bit	dec	hex	Function and description	Ref.
		128	80	TA does not return result code	Q1
				(see S40b1).
S24=	bit	dec	hex	Bit mapped register.
	0-1	0-3	0-3	Ring volume control,	N0-3
				increments of 1 in decimal.
	2	0	0	Ignore S21.1-2 when Phone 1
				key pad dialed.
		4	4	Do not ignore S21-2 when
				Phone 1 key pad dialed.
	3	0	0	Ignore S21.1-2 when Phone 2
				key pad dialed.
		8	8	Do not ignore S21-2 when
				Phone 2 key pad dialed.
	4-5	16-		Speaker volume control, in	L0-3
		48		increments of 16 in decimal
				value.
	6	0	0	POTS Port tone volume low.
		1	1	POTS Port tone volume high.
S27=	bit	dec	hex	Bit mapped register.
	3-5	0	0	Flow control disabled.	&H0
		24	18	Hardware (RTS/CTS) flow	&H3
				control.
		32	20	Software (XON/XOFF) flow	&H4
				control.
		40	28	Reserved.	&H5
S29=		0-	0-	Set default dial phone number	+000 *D
		39	39	pointer, use AT&Zn=s to store
				phone numbers.
S31=		0-	0-	Holds the ASCII decimal value	+017
		255	FF	of the XON.
S32=		0-	0-	Holds the ASCII decimal value	+019
		255	FF	of the XOFF.
S35=	bit	dec	hex	Bit mapped register.

Status Registers and Result Codes 131