ZyXEL Communications omni series Placing a Call from the Analog Adapter, European switch specific

AT Command	Description
ATS84.5=1	use.
AT&ZIn=s	MSN setting, assign Called phone number, “s,”
	to be answered by “n” port (where n=6 for Phone
	1 and n=7 for Phone 2).
AT&ZI6=s	Assign the Called phone number for analog
	adapter, Phone 1.
AT&ZI7=s	Assign the Called phone number for analog
	adapter, Phone 2.
ATS56=n	Flash timer, in 100 ms unit, to set maximum
	duration of ON-OFF hook transition to be
	recognized as “Flash”.
	European switch specific
ATS89.6=0	To disable the metering pulse for analog adapter,
	Phone 1.
ATS89.6=1	To enable the metering pulse for analog adapter,
	Phone 1.
ATS89.5=0	To disable the metering pulse for analog adapter,
	Phone 2.
ATS89.5=1	To enable the metering pulse for analog adapter,
	Phone 2.

Placing a Call from the Analog Adapter

Making a call from the analog adapter is as easy as picking up the telephone connected to the analog port and dialing. With a terminal program’s assistance you can also use the TA to dial the number for you.

Type:

ATDB714-693-0808<Enter> (Dial the number)

TA responds:

CONNECT (Dialing is complete)

Now, just pick up the phone handset and wait for the remote device to answer.

72 Handling Analog Calls (non-data)