Contacting ZyXEL, ∙ E-mail | ZyXEL Communications omni series

3.93/68/EEC of 22 July 1993 amending the Directives 89/336/EEC, 91/263 /EEC and 92/31/EEC.(Marking Directive)

4.Council Directive 73/23/EEC and 93/68/EEC of 26 Dec 1996 on the harmonization of the laws of the Member States relation to electrical equipment designed for use within certain voltage limits.

5.The Council Directive 92/31/EEC of 28 April 1992 amending directive on the approximation of the laws of the member states relating to Electro Magnetic Compatibility.

Contacting ZyXEL

If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation in one of the following ways:

∙Phone: In North America call between 8:00 AM and 5:00 PM PST at (714) 693-0808

Outside North America, you can dial +886-3-5783942 EXT 252 between 8:00AM and 5:00PM Taiwan time (GMT +8:00).

∙Fax: ZyXEL in North America: (714) 693-8811 or Taiwan: +886-3-5782439

∙E-mail:

∙Sales inquiries: sales@zyxel.com in North America sales@zyxel.hinet.net outside North America.

∙Technical support: support@zyxel.com in North America support@zyxel.hinet.net outside North America.

∙Product information: Visit our site on the World Wide Web: http://www.zyxel.com.

∙FTP: Information , such as ZyXEL software and ROM updates for North America can be found at this FTP address: ftp.zyxel.com

v

Image 5

ZyXEL Communications omni series user manual Contacting ZyXEL, ∙ E-mail

Contents

ZyXEL ZyXEL Limited Warranty Acknowledgments FCC Part 15 InformationCopyright 1997 by ZyXEL Page ∙ E-mail Contacting ZyXELPage Contents Installing the Windows 95 Driver INF file Understanding AT CommandsOutgoing Calls Incoming Calls Introduction Feature list Configuring Windows 95 Dial-Up Networking Capi InstallationError Correction and Data Compression with Placing outgoing calls Invoking V.42bis Data Compression Answering an X.75 call Making an X.75 CallCall Control for DSS1 Call Control for 1TR6 Old German Isdn Resetting The omni 103 Using The Embedded Protocol Analyzer Diagnostics 100Placing a Call Upgrading with Flash Eprom Register Descriptions 127 AT Command Descriptions 109Viewing and Setting S-Registers 125 Introduction Speed and Compatibility Key Features of the omniKey to Model Differentiation Technical Specifications Intelligent Features Interface Option Physical CharacteristicsUnpacking Your omni How to Become a Registered Owner Introduction Front Panel Installing omni External ModelsLED Indicators Page Back Panel Front Panel Switch Connecting to Your Computer Connecting to the Power Supply Connecting the omni.net to Your Computer Interface Model Connecting to Your Isdn Line Interface Power On and Self Diagnostics Installing omni External Models Selecting the Baud Rate Multiplier Installing omni Internal Models Plug and Play Connecting the TA to your PC Press Y to continue Following message will appear Connecting to Your Isdn Line Interface Model Omni.net Internal Card Installation S/T interface Configuring Your TA Configuring Your Isdn Line and NetworkConfiguring your TA using a Terminal program Type A\setup.exe and press Enter TA should respond Type Page Configuring Your Isdn Line and Network Isdn Communication Basics Understanding AT Commands Type of AT Command Example Supported AT command typesQuick Tips when issuing AT commands Command Description Dialing out using Isdn modeOutgoing Calls ATV0 Dialing out for Analog Adapter Port 2 omni.net Dialing out for Analog Adapter Port 1 omni.net InternalDialing out for Analog Adapter Port 1 omni.net AT Command Dial string it will map to Manually switching communication modes non-dataIncoming Calls Placing the Call Determining the Packet Length Digital Data Answering a Call using MSN AT&ZIn=s where ‘s’ is the MSN Command Function Ambiguity resolution switch for voice calls omni.netData over Speech Channel Best-effort call answering non-data Multi auto-answering of data calls Installing the Windows 95 Driver INF file Setup for Windows 95 and NTPage Page Configuring Windows 95 Dial-Up Networking Page Page IPX/SPX Compatible Click on TCP/IP Settings Capi Installation Page Introduction Point-to-Point Protocol PPP Async to Sync Conversion external Feature list Compression Control Protocol CCP Multilink PPP Bandwidth On Demand BOD BACP/BAP Point-to-Point Protocol PPP Answering a V.110 call 110 and Synchronous Mode Communications Synchronous Connections external AT Command DescriptionMaking V.110 Calls Command Messages 25bis Command SetCIC DIC DTR Drop-Dialing Operation Indicator Messages AT*D0 56 V.110 and Synchronous Mode Communications Placing outgoing calls 120 Isdn Communications Configuring the V.120 mode Answering incoming calls Dialing in V.120 mode Making a Bundled Call with Speeds of 128KbpsIdentifying your line provisioning Dialing pre-stored phone numbers Error Correction and Data Compression with Bundle Connection with V.42bis Data Compression Selecting V.120 for European Isdn DSS1Selecting V.120 for Germany National Isdn 1TR6 Page 10 X.75 Isdn Communications Making an X.75 Call Answering an X.75 call ATDIphonenumber1+phonenumber2 Invoking V.42bis Data Compression Bundle Connection with V.42bis Data Compression 70 X.75 Isdn Communications AT&V7 Handling Analog Calls non-dataAT&V6 Placing a Call from the Analog Adapter European switch specific Scenarios of an Incoming Voice Call Outcome Accepting an Incoming Call AT Commands Description Commands Description Feature Phone omni.netFlash key InterCom Receiving a second call Call WaitingPlacing a second call Call Reject Call BrokerCall Transfer Three-way Conference Call HFlash è H#3 Call Control for DSS1 Control of Outgoing Service IndicatorAdvanced Isdn Call Control S108.n= Function S108+n= FunctionS80 bit ‘n’ as follows = YnNnown-number/Znown-Subaddress Control of Isdn Phone Number and Sub-address Call Control for 1TR6 Old German Isdn G3 Fax Control of Endgerä Teauswahlziffer EAZModem Command Function Answering a Call for DSS1 Answering a Call Best-effort Call Answering Answering a Call for 1TR6 Data Call Indication Ambiguity Resolution Switch for Voice Calls non-dataMulti-Auto-Answering of Data Calls Disable inbound call connection Placing a Call Point-to-Point ConfigurationPlacing a call for DSS1 ATDxYnNncalledpartynumber/Zncalled-party- subaddress Placing a call for 1TR6 Leased Line Isdn ATDB2 ATDB1ATDB3 ATAB1 Security Types and Levels Security Functions Level 2 security Level 1 securityLevel 3 security Level Setting and Modifying Passwords Non-password Auto Call Back Function Security Functions Upgrading with Flash Eprom Upgrading Your omni Kernel Mode Diagnostics DiagnosticsTest Test Description Loopback with Self-test AT&T10 Power-on Self-testIsdn Loopback test AT&T9 B1/B2 Loopback with Self-test AT&T11 Diagnostic Command Atcg Using The Embedded Protocol Analyzer Resetting The omni Capturing the Protocol Data CD1 CD0CB0 CB1 Key Function Description ATC$ Diagnostics Simplex mode AT Command Set ReferenceMultiplex mode Operation Modes of the DTE Interface Basic AT Command Set AT Command Descriptions All the Following Commands Require a AT Prefix Command Options Function & Description CE0 BP0BP1 CH? CE1CL? CP0 Command Options Function & Description DB2 DB1DB3 DN? USA ATI SPID0 IsdnSPID1 SPID? Output Parameter Output Value Description Description of ATI3 OutputUPX Extended AT& Command Set Isdn Command Options Function & Description Command Options Function & Description Extended AT* Command Set Command Options Function & Description AT Command Set Reference Viewing S-registers Viewing and Setting S-RegistersStatus Registers and Result Codes Setting S-registers Bit Binary value Decimal value Hexadecimal value Register DescriptionsOperation Example-1 Example-2 Binary Dec Hex Not Command Bit Dec Hex Function and description Command Function & DescriptionBasic S-Registers ATSn=x Extended S-Registers ATSn=x Command Bit Dec Hex Function and description ATX2 ATX3 ATX4 ATX0ATX1 Command Bit Dec Hex Function and description Command Bit Dec Hex Function and description Command Bit Dec Hex Function and description Complete Command Bit Dec Hex Function and description Enable loopback 4 test DCA function enabled Command Bit Dec Hex Function and description SI= Fernsprechen analog 48000 bps PPP/MLPPP Command Bit Dec Hex Function and description PPP ATV0 ATV1 ATXn Result Code Option Table Connect Field Name Possible Values Result Code Chart Symbol ReferenceResult Code Field Descriptions Connect Strings for Error Corrected Connections Status Registers and Result Codes Phone Jack Pinout Assignments Not Connected Phone Jack Pinout Assignments Serial Port Interface Signal/Pin Number Description Direction NamePin DCE MAC DTETXD RXD RTS CTS DSR CD DCD DTR Index Index Bundled Index