19.7.12 [sip]

This command is to configure SIP related parameters.

usr/config$ sip

SIP stack information and configuration

Usage:

 

 

sip [-mode

pxmode]

 

sip [-px address] [-domain domain] [-prefix prefixstring]

[-line1 number]

 

[-expire t1] [-port udpPort] [-rtp rtpPort]

sip -print

 

 

-print

Display SIP stack information and configuration.

-mode

Configure as Proxy mode or Peer-to-Peer mode.

-px

Proxy server address. (Proxy IPv4 address or Proxy dns

name)

 

 

-pxport

Proxy server port.

(the port of proxy)

-domain

Specify domain name in the URL (if domain name is not

used,

 

specify as

null)

 

 

 

-prefix

Specify prefix string, use it when UserID contains

alphabets

(if UserID uses numerals, specify as null)

 

-line1

TEL1 Phone number.

 

-expire

The relative time after which the message expires(0 ~

(2^31-1))

 

 

-port

SIP local UDP port number (5060~5070), Default: 5060

-rtp

RTP port number (2326~65534), Default: 16384

Example:

 

 

sip -px 210.59.163.171 -line1 70

usr/config$

Figure 54. sip command list

Parameter Usages:

-mode

Configure as Proxy mode or Peer-to-Peer mode (0:

 

Peer-to-Peer mode, 1: Proxy mode).

-px

to specify Proxy address when SP5001/S is in proxy mode.

 

Proxy address can be IPv4 address or DNS name.

-domian

specify the domain name such as “sipcenter.com” and it will be

 

presented in the URL (xxxx@sipcenter.com).

-prefix

when your username contains alphabets, for example sip1123,

 

specify the prefix string as “sip”.

-line1

assign line 1 number.

-expire

this parameter is used to inform proxy server the valid duration

75

Page 76
Image 76
MicroNet Technology SP5001/S user manual 19.7.12 sip, Sip command list