Manuals / Brands / Computer Equipment / Network Card / Patton electronic / Computer Equipment / Network Card

Patton electronic 07M2160-GS, 2160 Series Show Command Menu, Write Command

1 107

Download 107 pages, 2.73 Mb

Show Command Menu 88

Model 2160 Series Getting Started Guide 5 • Console and Telnet configuration

Show Command Menu

The show command menu lists commands for viewing system and conﬁguration information for the Model

2160. Move the cursor “ >>” to show in the main menu and press Enter.

When you enter the show command, the following menu displays:

Move the cursor “ >>” to system in the show menu and press Enter.

Figure 53. System Information

Write Command

The write command saves all new conﬁguration changes to Flash on the Model 2160. You must use the write

command and reboot the Ethernet Extender for new conﬁguration changes to tak effect. Move the cursor “

>>” to write in the main menu and press Enter.

----------------------------------------------------------------------

Command: write <CR>

Message: Please input the following information.

Are you sure? (y/n): y

----------------------------------------------------------------------

>>

system Show general information

config Show all configuration

script Show all configuration in command script

Table 33. Show Command Menu

Command Description

system Displays general system information

conﬁg Displays detailed conﬁguration information

script Displays conﬁguration information in command script

Contents

Main CopperLink Model 2160 Series For Quick Start Installation Long Range Ethernet Extender Page Page Table of Contents Page Page Page Page List of Figures Page List of Tables About this guide Audience Structure Precautions Safety when working with electricity lean the case with a soft slightly moist anti-static cloth Protect the unit from moisture, vapors, and corrosive liquid Typographical conventions used in this document < > Futura type Garamond blue type Page Model 2160 overview Model 2160 front panel LED descriptions Model 2160 rear panel page 105. Page Page Typical application Distance charts Distance Chart 2160 Series Standard Setting Distance Chart 2160 Series High Speed Setting Chapter 3 Hardware installation Planning the installation Page Installing the Model 2160 Page Conguring the Model 2160 Chapter 4 Web conguration Page Setting Up the WMI Basic Conguration Options Page Page Page Page Advanced Conguration Options Page Page Advanced Configuration Options 43 Model 2160 Series Getting Started Guide 4 Web configuration Figure 15. VLAN Diagram VID 20 VID 30VID 10 Backbone VID 10 VID 20 VID 30 CopperLink Model 2160 Long Range Ethernet Extender Page 802.1Q VLAN Page Page Page Page Page Page Page Page Page Page Page Status Options Administration Options Page Page Page Utility Options Page Page Page Chapter 5 Console and Telnet conguration Page Page Page Main Menu Tree Page Enable Command Menu Table 16 explains the commands available in the main menu: Setup Command Menu Page Page Page Page Table 22 shows the options available within the 802.1Q Tag VLAN command menu: Page Page Page Page Table 31 shows the options available to set up the data rate: Page Page Page Status Command Menu Show Command Menu Write Command Reboot Command Ping Command Administration Command Menu Page Page The following menu displays: Select edit and press Enter. Page Utility Command Menu Exit Command Press y to exit the system. A conrmation screen displays: Chapter 6 Contacting Patton for assistance Contact information Warranty Service and Returned Merchandise Authorizations (RMAs) Page Page Compliance Radio and TV interference (FCC Part 15) CE Declaration of Conformity Authorized European Representative Appendix B Specications Page Page Page This section provides pin-out information for the ports of the Model 2160. Console port Conguration settings: 9600 bps, 8 bits, no parity, 1 stop bit, no ow control Figure 54. EIA-561 (RJ-45 8-pin) port Note N/C means no internal electrical connection. Ethernet Line (CopperLink)