Advanced Configuration Options 40
Model 2160 Series Getting Started Guide 4 • Web configuration
Advanced Configuration Options
This section contains information for setting up advanced options for the Model 2160 via the
WMI. Advanced setup contains Model 2160 Line, VLAN, QoS and Rate Control parameters.
Note The advanced functions are only for advanced users to setup
advanced functions. The incorrect advanced settings will affect the
performance of the Model 2160 or cause system errors and isconnec-
tion.
LINE
Click on LINE under Advanced on the main menu to reach the LINE advanced configuration page. You can
setup the Line Type (number of wires), Annex Type, TCPAM Type, Main Rate, SNR Margin, and Line Probe
settings for LINE parameters.
Figure 13. LINE page
Line Type
Select the line type for your model from the Link drop-down list. Line type means how many wires you want
to use on the line side. For example, you can select 2-wire, 4-wire or 8-wire line type for the 8-wire model.
Annex Type
Select the appropriate Annex type from the drop-down list. Annex AF describes the transmission and perfor-
mance requirements for North America. Annex BG describes performance and transmission requirements for
Europe.
Table 6. Line Type Chart
Line Type
2-wire 4-wire 8-wire
Model
Type
2160 2-wire model •
2161 4-wire model • •
2162 8-wire model •••