Patton electronic 07M2160-GS, 2160 Series manual Setup Command Menu, Line

Model 2160 Series Getting Started Guide 5 • Console and Telnet configuration

Setup Command Menu

The setup command menu lists commands for initially configuring the Model 2160. Move the cursor “ >>” to setup in the main menu and press Enter.

When you enter the setup command, the following menu displays:

>> line	Configure line parameters
lan	Configure LAN interface profile
vlan	Configure virtual LAN parameters
qos	Configure Quality of Service parameters
rate	Configure Rate Control parameters
mgmt	Configure management interface profile
dhcp	Configure DHCP parameters
dns_proxy	Configure DNS proxy parameters
hostname	Configure local host name
default	Restore factory default settings

Line

The line command menu lists commands for setting up the line port. Move the cursor “ >>” to line in the setup menu and press Enter. The following menu displays:

>> mode	Configure line	mode
link	Configure line	link
annex	Configure line	annex type
tcpam	Configure line	TCPAM type
maxMainRate	Configure line	max main data rate
snrMargin	Configure line	SNR margin
lineProbe	Configure line	line probe
clear	Clear current CRC error count

Table 18 shows the options available within the line command menu:

Table 17. Line Options

Menu		Options
Mode	STU-C	STU-R
Link Type	2-wire	4-wire	8-wire
Annex	AF BG
TCPAM	Auto	TCPAM-16	TCPAM-32 TCPAM-64
Max Main Rate	(3–89)
SNR Margin	(-10–21)
Line Probe	Disable	Enable

Setup Command Menu 73