Patton electronic 2160 Series, 07M2160-GS manual Pvid

Model 2160 Series Getting Started Guide									5 • Console and Telnet configuration
-----------------------------------------------------------------------------
	Command: setup vlan link_mode <1~6> <AccessTrunk>
	Message: Please input the following information.
	Port index <1~6>: 1
	Port link type (TAB Select) <Access>:
-----------------------------------------------------------------------------
Table 22 shows the options available within the 802.1Q Tag VLAN command menu:
				Access		The port can receive or send untagged packets.
				Trunk		The port can receive or send tagged packets.
					Table 22. 802.1Q VLAN Options
					1		2	3	4	5	6
	No.		VID		LAN1		LAN2	LAN3	LAN4	Line	Sniffing
1
	2
	3
	4
	5
	6
	7
	8
		PVID
	Link Type				Access		Access	Access	Access	Access	Access
					Trunk		Trunk	Trunk	Trunk	Trunk	Trunk

Port-Based VLAN. With port-based VLAN, the port is assigned to a specific VLAN independent of the user or system attached to the port. This means all users attached to the port should be members in the same VLAN. The network administrator typically performs the VLAN assignment. The port configuration is static and cannot be automatically changed to another VLAN without manual reconfiguration.

You can set up Port-Based VLAN using the method for 802.11Q. However, VID , PVID or link type do not matter for Port-Based VLAN. Use the list command to check the status of the VLAN.

-----------------------------------------------------------------------------

Virtual		LAN Parameter
VLAN Mode						: Port-Based VLAN
Virtual		LAN Table
No LAN1 LAN2 LAN3 LAN4					Line Sniffing
--	----		----	----	----	---- --------
1	1	1	1	1	1	1
2	-	-	-	-	-	-
3	-	-	-	-	-	-
4	-	-	-	-	-	-
5	-	-	-	-	-	-
6	-	-	-	-	-	-
7	-	-	-	-	-	-
8	-	-	-	-	-	-

-----------------------------------------------------------------------------

Setup Command Menu 78