MicroNet Technology SP5001/S Saving Your Configuration, Navigating the Web Configuration

LABEL	DESCRIPTION
Flash Clean	This link takes you to a screen where you can click flash memory
	information and configuration.
Commit Data	This link takes you to a screen where you can click save your changes to
	the non-volatile memory.
Reboot System	This link takes you to a screen where you can click to reboot SP5001/S.

2.3Saving Your Configuration

Click OK to save your changes back to volatile memory. SP5001/S loses these changes if it is turned off or loses power, so use the Commit Data link on the navigation panel to the left to save your changes to the non-volatile memory when your are done configuring.

2.4Navigating the Web Configuration

The web configuration uses one level. For example, to configure Network Interface, click the link on the navigation panel to open the configuration screen.

Figure 3. Network Interface Screen

17