Two Sets of SP5001/S
1.The WAN IP Address obtained from ADSL has two kinds of methods. One is fixed IP Address, while user applies for one or more fixed IP Addresses. Another is dynamic IP Address while user applies for
2.The LAN IP Address of User’s PC can be set as DHCP client in order to gain a valid one.
3.Assign an IP address to each set using DHCP or fixed address.
4.Enable the IP Sharing function for each set using following command.
Fixed IP Address
usr/config$ ifaddr
5.Configure separate SIP port and RTP port for each set to prevent from port conflict. For example, if set A uses the default settings (SIP port: 5060, RTP port: 16384), you must change set B’s setting to SIP port equal to 5061 and RTP port equal to 26384 for instance.
Change SIP port – usr/config$sip
Change RTP port – usr/config$sip
6.Use the Port Forwarding or Port Redirection function provided by IP Sharing device (Router). See the following for example.
58
