8.System Configuration Screen
Click System conf in the navigation panel and open the System Configuration Screen.
Figure 19. System Configuration
The following table describes this screen.
| Table 5. System Configuration |
|
|
LABEL | DESCRIPTION |
Keypad Type | Select |
|
|
RFC2833 Payload | RFC2833 Payload Type (range:96~128 |
Type |
|
|
|
FAX Payload Type | Set Fax Payload Type (range: 96 or 101, default: 101) |
|
|
Inter Digit Time | Set the DTMF inter digit time (second) |
|
|
Busy Forward | Enable it to route the call to the next line (While the line number is not |
| matched or engaged) |
|
|
End of Dial Digit | Set end of dial key as NONE, * , or #. |
|
|
OK | Click OK to save your changes back to volatile memory. |
|
|
36
